A patio is a place that people often associate with outdoor entertaining and relaxing on warm days. A dirty deck does not offer the same inviting look as a clean one intended to for a long time would. If you notice yours needs a little extra care, here are some techniques you can use to power or pressure wash it without damaging it.
To make your task easier, start by gathering all of your supplies before attempting to clean the patio. Your needed supplies include:
Pressure washer
Hose extension pole: This will allow you more reach when washing the patio surfaces higher than the ground level, such as steps or railings.
Blast nozzle: The type of nozzle will depend on what you need. For example, a zero-degree nozzle will give the best results when cleaning something foul or has mildew. A 40-degree nozzle can be used for most outdoor applications.
Turbo nozzle: The turbo nozzle offers maximum pressure to remove stubborn dirt and grime. If you have more time on your hands, use it after using a zero-degree or 40-degree one to see if any stains remain.
Water-resistant gloves: This will protect you from splashes of water and chemicals while not impeding movement in your hands.
Step 1:
Attach the extension pole to your pressure washer’s wand by pushing it into place. Some rods may require you to attach them with a screwdriver.
Step 2:
Wash the patio’s surface with a zero-degree nozzle. If it is not very dirty, you can also use a 40 degree one. Do not let the tip of the wand touch the ground because this could cause damage to it. Make sure to direct water away from any walkways or other surfaces you do not want to be sprayed by the force of your pressure washing equipment.
Step 3:
Reach places that are difficult to clean with a handheld turbo nozzle attached to your extension pole. This allows you to remove gunk and dirt that didn’t come off in Step 2.
Step 4:
Rinse the entire patio with fresh water and let dry completely for it to look its best and be ready for use again.
Some Tips:
- Have enough fresh water on hand to flush your patio while you work.
- Use rubber gloves while cleaning your patio to protect your hands from chemicals and splashes of water.
- Store your patio pressure washer indoors, or under a shelter so it does not become damaged by the elements.
How to Pressure Wash a Patio Without Damaging It
One thing that can be done is to frequently power wash all exterior surfaces on your home with soap and water using lower pressure settings and use a crack injection method with a high-pressure spray wand to fill cracks in your patio surface. This will help treat the cause of any deterioration rather than continue to use higher pressure washers that damage the surfaces of pavers or concrete patios.
One thing that can be done is to frequently power wash all exterior surfaces on your home with soap and water using lower pressure settings and use a crack injection method with a high-pressure spray wand to fill cracks in your patio surface. This will help treat the cause of any deterioration rather than continue to use higher pressure washers that damage the surfaces of pavers or concrete patios.
Final Words – How to Pressure Wash a Patio Without Damaging It
By following the steps in this article, you will be able to pressure wash your patio to look nice without doing any damage to it. This will help you keep it looking good and avoid high repair bills. You can also use these steps for any other types of surfaces outside your home that need a clean.
It’s important to know that there is a right and wrong way to pressure wash your patio. The techniques listed above will help you pressure wash your deck without damaging it.
